Axis CommunicationsURL: http://www.axis.com/LundPhone: +46 46 270 18 00BostonPhone: +1 800 444 AXISParisPhone:+33149691550LondonPhone: +44 1753 714310
Quick Installation GuideThis guide covers the installation and basic setup procedures for your AXIS StorPoint CD. If you need more detailed instructio
Connecting the HardwareTo install the StorPoint CD, follow these steps:1. Connect the SCSI cable to the SCSI connector on the StorPoint CD. 2. Connect
Setup for NetWare 4.xInstallation as an NDS ServerWhen used as an NDS server, the StorPoint CD must first be installed in the NDS tree.Note: If this i
Using NetWare/IPTo use the IP protocol in NetWare, you must set the Internet address. See “Setup for TCP/IP”.Follow these steps to set up the communic
Example: (The commands may be different on your system.) cd /var/ypmakeUsing ARP in Windows 95 and Windows NTEnter the following commands from the DOS
individual drive letter to run properly.Once the StorPoint CD has been mounted, you access it just as any other disk drive or file server connected to
Windows for Workgroups (NetWare)1. Start the File Manager and select Connect Network Drive… from the Disk menu.2. Select the entry for your new StorPo
Windows for Workgroups (Microsoft Networks - SMB)1. Start the File Manager and select Connect Network Drive… from the Disk menu. The Connect Network D
Comments to this Manuals