Axis Print Server 5470e User's Guide download pdf (Page 39)

AXIS 5470e User’s Guide 39

Setup for Queue-based printing over IPX/SPX (Remote Printer Mode)

If you don’t have a PSERVER created on the file server, start out with creating one in the

NetWare Administrator, as described here:

1. Start the NetWare Administrator.

2. Choose Tools | Print Services Quick Setup (Non-NDPS).

3. In the Print Services Quick Setup (Non-NDPS) dialogue, choose a name for the print server,

printer and queue object. Choose ’parallel’ as the printer type and Postscript as the Banner

type. Click Create.

4. Log in to the AXIS 5470e web interface and choose admin | Network Settings | Detailed View

| NetWare and write the name of the print server you just created together with its slot number

in the NPRINTER/RPRINTER1-field (the slot number is the number dedicated to the printer

you have just created).

5. Click OK when done.

6. Use RCONSOLE or go to the file server console where you have created the object, load

PSERVER.NLM and choose the print server you have just created.

7. From the available options, choose ’Printer Status’, choose your newly created printer object

and check that the attached queue status is ‘Waiting for job’.

Notes:

• If the status reads "Not Connected", log in to the print servers web interface, choose admin and click the Restart

button. The print server status in RCONSOLE will then change from "Not Connected" to "Waiting for job".

• If you choose to install the AXIS 5470e on an already existing PSERVER, make sure that you choose the next

available printer number (slot number).

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 50 51

No comments

Axis Print Server 5470e User's Guide Page 39