Axis 207W User Manual download pdf (Page 39)

AXIS 207W/AXIS 207MW - System Options

UPnP™

The camera includes support for UPnP™, which is enabled by default. If also enabled on

your computer, the camera will automatically be detected and a new icon will be added to

“My Network Places.”

Note:

UPnP must also be enabled on your Windows XP. To do this, open the Control Panel from the Start Menu

and select Add/Remove Programs. Select Add/Remove Windows Components and open the Networking

Services section. Click Details and then select UPnP as the service to add.

RTP

These settings are the port range, IP address, port number

(video and audio), and

Time-To-Live value to use for the video stream(s) in multicast MPEG-4 format. Only

certain IP addresses and port numbers should be used for multicast streams. For more

information, please see the online help.

Bonjour

The AXIS 207MW includes support for Bonjour. When

enabled, the camera is

automatically detected by operating systems and clients that support this protocol.

Ports & Devices

I/O Ports - the pinout, interface support and the control and monitoring functions

provided by this connector are described in The I/O Terminal Connector, on page

42.

LED Settings

The Status indicator LED on the front of the camera can be set to flash at a configurable

interval (or to not light up at all) whenever the unit is accessed. For a listing of all LED

behavior, see page 7, or the online help.

Note:

The LED does not flash when the stream is retrieved using MPEG-4 multicast.

Maintenance

• Restart - The camera is restarted without changing any of the settings.

• Restore - The unit is restarted and most current sett

ings are reset to factory default val-

ues. The settings that will not be reset are as follows:

• the boot protocol (DHCP or static)

•

the static IP address

• the default router

•the subnet mask

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 62 63

No comments

Axis 207W User Manual Page 39