Axis 214PTZ Nework Camera User Manual download pdf (Page 8)

AXIS 214 PTZ

Accessing the camera from the Internet

Once installed, the camera is accessible on your local network (LAN). To access the camera from the Internet

you must configure your router/firewall to allow incoming data traffic. For security reasons this is usually

done on a specific port. Please refer to the documentation for your router/firewall for further instructions.

For more information, please visit the AXIS Internet Dynamic DNS Service at www.axiscam.net or, for

technical notes on this and other topics, visit the Axis Support Web at www.axis.com/techsup

The Live View page

The following provides an overview of the controls found on the Live View page. If the AXIS 214 PTZ has

been customized (from Setup > Live View Config > Layout), the controls will be displayed accordingly:

The Video Format drop-down list allows the video format on the Live View page to be

temporarily changed.

These buttons start/stop the Sequence Mode which automatically displays the view from preset

positions at set intervals. Sequence mode is configured in Setup > PTZ Configuration >

Sequence Mode.

The source list is used to select the preset positions already configured in the camera.

ese are created in Setup > PTZ Configuration > Preset Positions.

The Manual trigger buttons trigger an action directly from the Liv

e View page. These buttons

are configured under S

etup > Live View Config > Layout. Click these buttons to manually

start and stop events.

Use the Snapshot button to capture a snapshot of the image currently being displayed in the

window. Right-click on the image to save it in JPEG format on your computer.

The 2 types of Output button

each control the output directly

from the Live View page. These

are configured under Setup >

Live View Config > Layout.

Pulse - click this button to activate the output for a

defined period of time, e.g. to switch on a light for 20

seconds.

Active/Inactive - click these buttons to manually start

and stop a connected device, e.g. switch a light on/off.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 53 54

No comments

Axis 214PTZ Nework Camera User Manual Page 8