Axis 292 User Manual download pdf (Page 9)

AXIS 292 - Installing the AXIS 292

Installing the AXIS 292

Mounting the AXIS 292

The AXIS 292 is supplied with a mounting kit for wall or rack mounting. The mounting

brackets can be positioned for mounting the network video decoder on a vertical surface or

in a rack (4U). Follow the instructions below to attach the mounting bracket to the video

server:

1. Slide the grey frame off the front

panel of the network video decoder

(no tools needed).

2. Insert the metal plates in the

slots on each side of the network

video decoder.

3. Position and attach the brackets

on each side using the provided

screws.

Connecting a TV monitor to the AXIS 292

Check your TV monitor to see which connectors are available. It is recommended to use

S-video if available. Connect the TV monitor to the appropriate Video output connector.

Installing on a network

The AXIS 292 is designed for installation on an Ethernet network. This involves assigning

an IP address to the network video decoder, either manually or via an automated network

service (DHCP). Depending on your network, select one of the following procedures:

• Automatic Installation using DHCP, on page 10.

• Manual Installation using AXIS IP Utility, on page 11.

• Manual Installation using ARP and Ping in Windows, on page 12.

• Manual Installation using ARP and Ping in UNIX/Linux, on page 13.

Notes: • The AXIS 292 has the default IP address 192.168.0.90

• DHCP is enabled by default

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 51 52

No comments

Axis 292 User Manual Page 9