Axis 0202-004 Datasheet download pdf (Page 25)

AXIS Camera Station - AXIS Camera Station Client

AXIS Camera Station Client Interface

The AXIS Camera Station Client interface is similar to that of the AXIS Camera Service with a few differences

under file menu that are described here.

Connection - To establish a connection between the AXIS Camera Station (server application) and AXIS Camera

Station Client, the server’s IP address and password must be entered under File > Connection.

Get Configuration - Every time you start AXIS Camera Station Client, new updates are sent to it from the server,

containing e.g. camera configuration settings. You can download configuration settings from AXIS Camera Station to

AXIS Camera Station Client by selecting this menu item.

Install MPEG-4 - This menu item is enabled when AXIS MPEG-4 decoder hasn’t been installed. Click on this

option to register and install the MPEG-4 decoder license included in AXIS Camera Station Client software.

Pop-up on Motion/Alarm - Check to enable the display of a pop-up window showing the video image when there

is an alarm. Use Camera pop-up filter... to set which cameras will use this feature.

Sound on Alarm - Select this menu item to play the sound file specified in Test Connection above, whenever there

is an alarm.

To Get and Upload configuration settings from the server, check Allow clients to update configuration under

Options >General Settings > General in AXIS Camera Station. Also, if password protection is enabled, the user

must be granted Administration rights in AXIS Camera Station, see

How to set up User Access Settings, on page

19.

AXIS Camera Station Client Configuration

Client users can be granted access to the AXIS Camera Station Client configuration pages, which contain the

same parameters and settings as the AXIS Camera Station. For Clients who have not been granted access to the

configuration pages, the Options menu is not available.

Important!

Permission to access the configuration pages in AXIS Camera Station Client are defined from

AXIS Camera Station under Options > General Settings > General.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 37 38

No comments

Axis 0202-004 Datasheet Page 25