Axis 5550 User Manual download pdf (Page 46)

Adding Printers in Macintosh

46 AXIS 5550 User’s Manual

Example: The following example describes how you set the print server parameters

in AppleTalk.

Important:

1. Open the Chooser from the Apple menu.

2. Select a network printer driver — any LaserWriter will do.

3. Select the printer port ending with _CFG.

4. Close the Chooser.

5. Open a text editor, e.g. SimpleText.

6. Write a text file containing the parameters you want to set:

Note:

7. Print the text file. The settings will be stored in the print server.

8. Open the Chooser and select the printer port you wish to use for printing

documents.

9. Close the Chooser.

Note:

DO NOT use the parameter values from this example when configuring your print server. You

should select values that are appropriate for your printers and network settings.

BINARY_TYPE_1. :BCP

INT_ADDR. :192.168.3.191

ATYPE_1. :EPSONLQ2

Parameters that you do not want to set should be excluded from the text file. Refer to the

Parameter list in this manual for information about which values that are valid for each

parameter.

The _CFG port disappears 60 minutes after the AXIS 5550 has been powered on. If you want

it to reappear, you must restart your print server.

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 160 161

No comments

Axis 5550 User Manual Page 46