Axis AXIS 214 PTZ User Manual

PRODUCT USER MANUAL INSTALLATION GUIDE D2 COOLDOME™ ENCLOSURE Product Models: D2-CD-12V D2-CD-24V

7 - #1 & #2 Phillips head screw driver-#1 Flat Blade screw driver or smaller- 3/8 Socket wrench, nut driver, or adjustable wrench- 5/16 Socket

8 Low Voltage Line Drop Wire Gauge Tables See 12 VDC & 24 VDC Wire Gage Selector Charts – Next Page

9 Wire Gage Selector Charts

10

11 Camera Power Connection The D2-CD-12V provides an 18” lead from the COOLDOME power circuit with the following common 12 VDC Barrel connector,

12

13 Stand Off Assembly Key for Camera Height Adjustment Camera mount stand offs can be adjusted to any height from 0” to 3.75” using assembly

14

15 Installing Camera BracketAxis 214 PTZ1. Install the Axis 214 PTZ camera onto the D2 Camera Bracket with (3) m3-.5 screws, (3) m3 external lock w

16

Table of Contents Limited Warranty Info ..………………………………………………………………………………………………………………………………………………………………………………... 0 Product Installation Precautions

17 Installing Camera BracketAxis 233D PTZ2. Do this by aligning the two holes on the D2 camera bracket with the Axis ceiling bracket adapter. Use

18 Installing Camera BracketAxis 233D PTZ6. Now slide the camera bracket with the camera into place to line up with 4 scr

19 Installing Camera BracketCanon VB-C3001. Install the Canon VB-C300 camera onto the D2 Camera Bracket center hole with (1) .25

20 Installing Camera BracketPanasonic NS-2021. Install the Panasonic NS-202 camera onto the D2 Camera Bracket center hole with (1) .25"-20 3/8

21 Installing Camera BracketPanasonic BB-HCM381/580/581 & KX-HMC2801. Install the Panasonic camera onto the D2 Camera Bracket center hole with

22 Installing Camera BracketSony RZ25N1. Install the Sony RZ25N camera onto the D2 Camera Bracket with (3) m3-.5 ½” Long screw (3) m3 External Lock

23 Installing Camera BracketSony RZ50N1. Install the Sony RZ50N camera onto the D2 Camera Bracket center hole with (1) .25"-20 3/8" Long

24 Installing Camera BracketSony RX550N1. Install the Sony RX550N camera onto the D2 Camera Bracket with (4) m3-.5 ½” long screws, (4) m3 external

25 Installing Camera BracketToshiba WB21A2. Do this by aligning the four holes on the D2 camera bracket with the Toshiba ceiling bracket adapter.

26 6. Now slide the camera bracket with the camera into place to line up with 4 screws from the standoffs.Continued . . . . . . . .Installing Came

0 LIMITED WARRANTY DOTWORKZ, INC. PRODUCTS DOTWORKZ SYSTEMS INC. Warrants this Product to be free from defects in material or workmanship, a

27 Optional Steady Step Mounting System Steady Step Bracket Steps adjust in ¼” increments. To adjust 1/8” between step settings, add 1/8” brass ma

28 D2 Exploded Detail

29 D2 Mounting Detail

1 PRODUCT INSTALLATION PRECAUTIONS – WARNINGS – ADDITIONAL INFORMATION (RETAIN THIS DOCUMENT) IMPORTANT SAFEGUARDS 1 Read Instructions - All

2 Conduit Guidelines: 1) If wires, cabling, or conduit are coming at enclosure wire entry level, or above, always create a drip loop.2) Please use

3 Foam Conduit Feed Plugs for ½” I.D. (PG-13) ConduitPrevents Humid Air exchange from venting thru electrical conduit into Dotworkz sealed enclosur

4 Proper Cable Management to EnclosureAvoid common Installation MistakesAlways Create a Drip Loop for all Cables or Conduit Entering Dotworkz D2 Hou

5 Dotworkz D2 Seals & drip edges are engineered for horizontal installation Only: Dome bubble faces down.Vertical and dome-up installations are

6 Optional BR-AXBR Camera Mount Bracket for Larger Cameras(Request BR-AXBR at time of order for listed camera models)Optional BR-AXBR Bracket Direc