Axis M3011 Fixed Dome Network Camera User Manual download pdf (Page 32)

AXIS M3011 - System Options

Resetting to Factory Default Settings

To reset the camera to the original factory default settings, go to the System Options > Maintenance web page (as described

in Maintenance, on page 30) or use the Control button on the side of the camera (see page 5) as described below:

Using the Control Button

To reset the camera to the factory default settings using the Control Button:

1. Disconnect the power cable or if using PoE, disconnect the network cable.

Press and hold the Control button while reconnecting power.

3. Keep the Control button pressed until the Status indicator color changes to amber (this may take up to 15 seconds).

4. Release the Control button.

5. When the Status indicator changes to green (which may take up to 1 minute), the process is complete and the camera

has been reset. The unit now has the default IP address 192.168.0.90

Note:

For other methods of setting the IP address, please refer to the product’s Installation Guide that accompanies the

product, or download a copy from www.axis.com

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 44 45

No comments

Axis M3011 Fixed Dome Network Camera User Manual Page 32