Axis 9010 User Manual download pdf (Page 4)

4 Installation Note N9010-90048

Option YAS Installation Kit

Introduction

This kit contains all of the instructions required to install Option YAS on Keysight EXA and MXA

signal analyzers. Option YAS enables the ANALOG OUT port to provide a Y-Axis screen video

output.

The rear panel ANALOG OUT port is present on all EXA and MXA signal analyzers, however Option

YAS must be enabled via a license file.

NOTE

1. At the time of manufacture the hardware related to this option was fully

adjusted and the option performance was verified to be within its warranted

specifications. Within one year of the initial calibration date of the instrument

this option is fully calibrated with no further adjustment or verification

testing.

To determine the initial calibration date, locate the original calibration

certificate that was shipped with the instrument at the time of purchase. The

Date of Calibration is printed on the original calibration certificate.

To ensure that this newly installed option has been installed properly, the

procedure that follows includes a functional check.

2. Option YAS requires instrument software version A.07.00 or later. The

latest revision of the X-Series signal analyzer software may be downloaded

from:

http://www.keysight.com/find/Xseries_software

3. This option is licensed for one instrument model/serial number

combination. The license key will only install on the designated instrument.

1 2 3 4 5 6 7 8 9

No comments

Axis 9010 User Manual Page 4