Axis 0275-004 Datasheet download pdf (Page 32)

AXIS 209FD/FD-R

Resetting to the factory default settings

To reset the camera to the original factory default settings, go to the System Options > Maintenance web

page (as described in Maintenance, on page 29) or use the Control button, which is found inside

the camera

cover (see Overview, on page 6) as described below:

Using the Control Button

To reset the camera to the factory default settings using the Control Button:

1. Remove the camera’s cover.

Disconnect the network to remove power.

3. Press and hold the Control button while reconnecting the cable.

4. Keep the Control button pressed until the Status Indicator color changes to amber (this may take

up to 15 seconds).

5. Release the Control button.

6. When the Status Indicator changes to Green (which may take up to 1 minute), the process is

complete and the camera has been reset. The unit will now have the default IP address

192.168.0.90

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 45 46

No comments

Axis 0275-004 Datasheet Page 32