Axis Network Camera AXIS 221 Installation Guide download pdf (Page 10)

Page 10 AXIS 221/223M Installation Guide

Adjust the image and focus

To adjust the position of the lens:

1. Open the Live View page in your web browser.

2. Check the image in the Live View page, and move the lens to the desired position.

To focus the AXIS 221/223M:

1. From the Basic Configuration page in the setup tools, open the Focus adjustment page.

2. Set the DC-Iris to Disabled and click Save.

3. Unscrew the zoom puller on the lens by turning it anti-clockwise. Adjust the zoom

setting as required.

4. Re-tighten the zoom puller.

5. Unscrew the focus puller on the lens. Adjust the focus as required. Re-tighten the focus

puller.

6. From the Focus

adjustment page, set the

DC-Iris to Enabled and

click Save.

Note:

The DC-Iris should always

be disabled while focusing

the camera. This opens the

iris to its maximum, which

gives the smallest depth of

field and thus the best

conditions for correct focusing. When the focus is set with this method it will then be

maintained in any light conditions.

Zoom puller

(Tele/wide)

Focus puller

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 70 71

No comments

Axis Network Camera AXIS 221 Installation Guide Page 10