Axis P3346-V User Manual download pdf (Page 45)

AXIS P33 Series - System Options

Ports & Devices

This page allows configuration of the input and output ports supported by this device. Ports can be given descriptive names,

and their Normal state can be configured.

For more information, see the online help .

LED

For a listing of all LED behavior, see page 6 or the online help .

Maintenance

• Restart - the camera is restarted without changing any settings.

• Restore - the unit is restarted and most current settings are reset to factory default values. The settings that do not

reset are:

• the boot protocol (DHCP or static)

• the static IP address

• the default router

• the subnet mask

• the product interface language

• the system time

• focus and zoom setup

• Default - the default button should be used with caution. Pressing this returns the camera's settings to the factory

default values (including the IP address).

• Calibrate - The Calibrate button is used to reset the optics to the factory default position. This may be necessary in

situations where the optics has lost its calibration during transport or has been exposed to extreme vibrations. Focus

and Zoom will also be reset to default positions and need to be reconfigured. Go to Video & Audio > Focus & Zoom.

Upgrade Server - See Upgrading the Firmware, on page 48.

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 67 68

No comments

Axis P3346-V User Manual Page 45