Axis 5012-014 User Manual download pdf (Page 6)

Page 6 Safety Information

Safety Information

Please read the following carefully before installing and connecting the

system to a power source.

Note:

Only qualified and trained service personnel (in accordance with IEC 60950 and AS/NZS

3260) should install, replace, or service the equipment. Install the system in accordance

with Country, National, or the U.S. National Electric Code if you are in the United

States.

Precautions

1. The building where this product is used requires a fuse or circuit

breaker no larger than 15 A for 120 VAC (U.S.A.) or 10 A, 230 VAC

(international). The building facility must protect the AXIS PoE

Midspans 8P/16P from over current or short-circuits.

2. Read the Midspan Hardware Setup procedure before connecting

the AXIS PoE Midspans 8P/16P to a power source (including

power cord requirements).

3. Do not operate the product in an area that exceeds the maximum

recommended ambient temperature of 104 ºF/ 40 ºC to avoid

overheating the AXIS PoE Midspans 8P/16P. Allow at least 3 to 4

inches/ 7.6 to 10.2 cm clearance around all ventilation openings.

4. Do not stack the chassis on any other equipment to support its

weight. Shelf mounted equipment requires a stable and durable

surface. Do not push or pull on the Midspan while installing.

5. The AXIS PoE Midspans 8P/16P consists of two rows of "Data”

and "Data & Power" ports. The ports use RJ-45 data sockets.

Connect only RJ-45 data cables to these sockets. Do not connect

telephone cables into these ports.

6. Do not work on the AXIS PoE Midspans 8P/16P system or connect

or disconnect cables, when there is lightning.

7. The AC or DC plug/socket combination must be accessible at all

times, as it is the main disconnect device to the product.

1 2 3 4 5 6 7 8 9 10 11 ... 53 54

No comments

Axis 5012-014 User Manual Page 6