Axis 5550 User Manual download pdf (Page 85)

Updating the Firmware

AXIS 5550 User’s Manual 85

Section 9 Updating the Firmware

Upgrading the Firmware

You can upgrade the AXIS 5550 firmware using one of the following

methods:

• AXIS ThinWizard (TCP/IP)

• From the print server’s internal Web pages (TCP/IP)

• FTP (TCP/IP)

Note:

Upgrading from the

Print Server’s Internal

Web Pages

Follow these instructions to upgrade the firmware of your print server

from its internal Web pages (flash loading over the Web):

1. Open your Web browser, enter the IP address of your print server and

press Enter. (See “Using a Web browser for Print Server Management” on

page 88 for detailed instructions on accessing your Axis print server on

the Web).

2. From the Admin mode, click the Firmware Upgrade button. From here you

can upgrade your print server with the latest available firmware.

Upgrading using

AXIS ThinWizard

AXIS ThinWizard is a tool that enables batch upgrading of several print

servers and can be used for upgrading the print server’s firmware in

TCP/IP networks.

Follow the instructions below to upgrade your print servers using AXIS

ThinWizard:

1. Log in to AXIS ThinWizard.

2. Open the Network Group that contains the print server to be upgraded.

3. Click the Firmware button. The Firmware Wizard starts.

4. Browse through the upgrading tips and click Next > when you are done.

Select Latest Available Version. Click Next >.

5. Select the servers you want to upgrade, by checking the correct upgrade

boxes. Click Next >.

6. Enter the default User ID and Password of the servers you selected in the

previous step. Select whether you want AXIS ThinWizard to verify the

password immediately or when the upgrading job has started, by checking

the appropriate box. Click Next >.

Updating instructions are supplied with the firmware release notes.

1 2 ... 80 81 82 83 84 85 86 87 88 89 90 ... 160 161

No comments

Axis 5550 User Manual Page 85