Axis P3304 User Manual download pdf (Page 17)

AXIS P3304/-V - Video & Audio settings

Camera Settings

This page provides access to the advanced image settings for AXIS P3304/-V.

Image Appearance

Color level - Select an appropriate level by entering a value in the range 0-100. Lower values mean less color saturation, the

value 100 gives maximum color saturation.

Brightness - The image brightness can be adjusted in the range 0-100, wh

ere a higher value produces a brighter image.

Sharpness - Controls the amount of sharpening applied to the image.

Contrast - Adjust the image's contrast by

raising or lowering the value in this field.

White balance

This is used to compensate for the different colors present in different light sources, to make the colors in the image appear

the same. The AXIS P3304/-V can be set to automatically identify the light source and compensate for its color. Alternatively,

the type of light source can be manually selected from the drop-down list. Please see the online help files for a

description of each available setting.

Wide Dynamic Range

WDR (Wide dynamic range) corrects the exposure when there is extreme contrast between light

and dark areas in an image.

Enable Dynamic Contrast - Test the different levels to find the one that works best for your light conditions. Click View...

after saving to view the image in a new window.

Note that Wide dynamic range is only possible w

hen the Exposure control setting is set to Automatic.

Exposure Settings

Configure the exposure settings to suit the image quality requirements in relation

to lighting, frame rate and bandwidth

considerations.

Exposure control - This setting is used to remove 50/60 Hz flicker.

Enable Backlight compensation - Backlight compensation makes the subject appear clearer when the image backgr

ound is

too bright, or the subject too dark.

Exposure zones - this setting determines which part of the image

is used to calculate the exposure.

Exposure priority - This defines the balance between image quality and the frame rate. Wh

en Motion is prioritized, motion

blur is minimized, but the image quality may be reduced with a higher frame rate. A prioritized Low noise will provide

better image quality with a lower frame rate.

Enable automatic iris adjustment - - This should always be set to Enabled, except

during focusing, or when using a fixed

iris lens.

Once satisfied, click Save. Click Vie

w to view the video stream with the current configuration.

View Area

When setting up a view area it is recommended that video stream resolution be the same size as or smaller than the view area

size. Setting the video stream resolution larger than the view area size implies digitally scaled up video after sensor capture,

requiring more bandwidth without adding image information.

Choose an Aspec

t ratio, and a Video stream resolution from the drop-down list. Check Enable PTZ to enable digital PTZ in

the view area

The first time an area is created it covers the whole overview image. With

the help of your mouse size and position the box

over the desired area of the overview image.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 57 58

Comments to this Manuals

No comments

Axis P3304 User Manual Page 17

Comments to this Manuals

Related products and manuals for Security cameras Axis P3304