Axis P3343-VE Installation Guide download pdf (Page 10)

Page 10 AXIS P3343-VE/P3344-VE Installation Guide

AXIS Camera Management - multiple cameras/large

installations

AXIS Camera Management can automatically discover multiple Axis devices, show connection

status, manage firmware upgrades, and set IP addresses.

Automatic discovery

1. Check that the camera is connected to the network and that power has been applied.

2. Start AXIS Camera Management. When the camera appears in the window, right-click the link

and select Live View Home Page.

3. See page 11 for instructions on how to set the password.

Assign an IP address in a single device

1. Select AXIS P3343-VE/P3344-VE in AXIS Camera Management

and click the Assign IP button .

2. Select Assign the following IP address and enter the IP

address, the subnet mask, and default router the device will

use.

3. Click OK.

Assign IP addresses in multiple devices

AXIS Camera Management speeds up the process of assigning IP

addresses to multiple devices, by suggesting IP addresses from a

specified range.

1. Select the devices you wish to configure (different models can be

selected) and click the Assign IP button .

2. Select Assign the following IP address range and enter the range

of IP addresses, the subnet mask, and default router the devices will use.

3. Click the OK button.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 81 82

No comments

Axis P3343-VE Installation Guide Page 10