Axis 240Q Video Server User Manual download pdf (Page 22)

AXIS 240Q - Event Configuration

Event Configuration

This section describes how to configure the AXIS 240Q for alarm handling. Various actions

can be configured to run when certain types of events occur.

Event Servers

Event Servers are used for e.g. receiving uploaded image files and/or notification

messages. To set up Event server for your AXIS 240Q, go to Setup > Event Configuration

> Event Servers and enter the required information according to the selected server type.

For details on each setting, please

refer to the online help available from each web

page.

Note:

Pre-trigger and Post-trigger buffers will be lost if the connection to the event server fails.

When the setup is complete, the connection can be tested by clicking the Test button (the

connection test takes approximately 10 seconds).

Event type A set of parameters describing how and when the video server is to perform certain actions

Triggered Event (see page

)

- the circumstances that start an event e.g. at a signal from an external device, such as a door

switch or a motion sensor

Scheduled Event (see page

)

- the circumstances that start an event e.g. at a pre-programmed time

Action - what occurs when the event runs e.g. video images uploaded to an FTP server, email notifi-

cation sent, etc.

Server type Purpose Information required

FTP Ser

ver • receives uploaded images • Descriptive name of your choice

• User Name and Password (to FTP server)

• Upload path, e.g. images/

•Port number

• Use passive mode if there is a firewall between the video server

and FTP server

HTTP Server • receives notification messages

• receives uploaded images

• Descriptive name of your choice

• URL (address)

• User Name and Password (to HTTP server)

• Proxy address/Proxy port (if required)

• Proxy User Name and Password (if required)

TCP Server • receives notification messages • Descriptive name of your choice

• User Name and Password (for TCP server)

•Port number

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 65 66

Comments to this Manuals

No comments

Axis 240Q Video Server User Manual Page 22

Comments to this Manuals

Related products and manuals for Video servers/encoders Axis 240Q Video Server