Axis Q7900 Rack User Manual download pdf (Page 31)

AXIS Q7406 - System Options

Network

Basic TCP/IP Settings

AXIS Q7406 support both IP version 4 and IP version 6. Both versions may be enabled simultaneously, and at least one version

must always be enabled. When using IPv4, the IP address for the camera can be set automatically via DHCP, or a static IP

address can be set manually. If IPv6 is enabled, the video encoders receive an IP address according to the configuration in the

network router. There is also the option of using the AXIS Internet Dynamic DNS Service. For more information on setting the

IP address, please see the online help .

Network Settings - Click the View button for an overview of the IP configuration of the video encoder.

IPv4 Address Configuration - Check this box to enable IPv4.

Obtain IP address via DHCP - Dynamic Host Configuration Protocol (DHCP) is a protocol that lets network administrators

centrally manage and automate the assignment of IP addresses on a network. DHCP is enabled by default. Although a DHCP

server is mostly used to set an IP address dynamically, it is also possible to use it to set a static, known IP address for a

particular MAC address.

Note:

DHCP should only be enab

led if using dynamic IP address notification (see below), or if your DHCP server can update a

DNS server, which then allows you to access the AXIS Q7406 by name (host name). If DHCP is enabled and you cannot

access the unit, you may have to reset it to the factory default settings and then perform the installation again.

Use the following IP address - To use a static IP address for the AXIS Q7406, check the radio button and then make the

following settings:

• IP address - Specify a unique IP address for your AXIS Q7406. (To check if the IP address you intend to use is available or

not, click the Test button)

• Subnet mask - Specify the mask for the subnet the AXIS Q7406 is located on

• Default router - Specify the IP address of the default router

(gateway) used for connecting devices attached to different

networks and network segments.

IPv6 Address Configuration - Check the box to enable IPv6. Other settings for IPv6 are configured in the network router.

Services - Enable ARP/Ping setting of IP address - The IP address can be set using the ARP/Ping method, which associates

the unit's MAC address with an IP address. Check this box to enable the service. Leave disabled to prevent unintentional

resetting of the IP address.

Notes:

• The ARP/Ping service is automatically disabled two minutes after the unit is started, or as soon as an IP address is

set.

• Pinging the unit is still possible when this service is disabled.

Enable AVHS - AXIS Video Hosting System (

AVHS) in conjunction with an AVHS service provides easy and secure Internet

access to live and recorded video accessible from any location. For more information and help to find a local AVHS Service

Provider please go to www.axis.com. If AVHS is not to be used this option can be disabled.

One-click enabled -

Press the camera’s control button (see Overview, on page 4) to connect to an AVHS service over the

Internet. Once registered the camera stays connected to the AVH

S service. If the camera is not registered within 24 hours

after the button is pressed, the camera will disconnect from the AVHS service.

Always - The camera will co

nstantly attempt to connect to the AVHS service over the Internet. Once registered the camera

will stay connected to the service. This option can be used when the camera is already installed and it is not convenient to use

the one-click installation.

AXIS Internet Dynamic DNS Service - U

se the AXIS Internet Dynamic DNS service to assign a host name for easy access to

your video encoder (requires Internet access).

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 50 51

Comments to this Manuals

No comments

Axis Q7900 Rack User Manual Page 31

Comments to this Manuals

Related products and manuals for Video servers/encoders Axis Q7900 Rack