Axis Q7900 Rack User Manual download pdf (Page 9)

AXIS Q7406 - Using the video encoder

The Live View page

If your video encoder has been customized to meet specific requirements, not all buttons and other items described below will

be displayed in the Live View page. Below, find an overview of each available button:

General controls

AXIS Media Control toolbar

The AMC viewer toolbar (AXIS Media Control) is available in Microsoft Internet Explorer only. See AXIS Media Control toolbar,

on page 9 for more information. AMC displays the following buttons:

Pan/Tilt/Zoom controls

The Stream Profile drop-down list allows you to select a customized or pre-programmed stream pro-

file on the Live View page. Stream profiles are configured under Video > Stream Profiles, see Stream

Profiles, on page 13 for more information.

Pulse - click this button to activate the output for a defined period of time - e.g. switching a light on

for 20 seconds.

Active/Inactive - click these buttons to manually start and stop a connected device - e.g. switch a

light on/off.

The Action buttons can trigger an event directly from the Live View page. These are configured

under Setup > Live View Config > Layout.

The Snapshot button saves a snapshot of the video image currently on display. Right-click on the

video image to save it in JPEG format on your computer. This button is primarily intended for use

when the AMC viewer toolbar is not available.

The Play

button connects to the Axis product and starts playing a media stream.

The Stop button stops the stream being played and terminates all network traffic with the Axis product.

The Snapshot

button takes a snapshot of the current image. The location where the image is saved can be

specified using the AXIS Media Control (AMC).

Click the V

iew Full Screen button and the video image will fill the entire screen area. No other windows will

be visible. Press Esc (E

scape) on the computer keyboard to cancel full screen view.

The Record button is used to record the current video stream. The location where the recording is saved can

be specified using the AXIS Media Control toolbar.

When in Center Mode, click on any part of the image other than its exact center and the camera will move

so that the point you clicked on becomes the new center of the image.

If you select Emulate Joystick Mode, the camera moves in the direction of the mouse pointer. If you click and

hold down on the left mouse button, and then point your cursor at the lower left hand corner of the image,

the camera continues to move left and down until you release the mouse button.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 50 51

No comments

Axis Q7900 Rack User Manual Page 9