Axis Q1755 User Manual download pdf (Page 35)

AXIS Q1755 - System Options

SNMP

The Simple Network Management Protocol (SNMP) allows remote management of network devices. Depending on the level of

security required, select the version of SNMP to use. The three levels of security are:

• SNMP V1 - includes no security.

• SNMP V2c - uses very simple security. The community name can be specified as a password for read or read/write access

to all supported SNMP objects. The community is the the group of network devices using SNMP.

• SNMP V3 - provides encryption and secure passwords. HTTPS

must be enabled.

UPnP™

The network camera includes support for UPnP™. UPnP™ is enabled by default, and the network camera then is automatically

detected by operating systems and clients that support this protocol.

RTP/H.264

These settings are the port range, IP address, port number (video and audio), and Time-To-Live value to use for the video

stream(s) in multicast H.264 format. Only certain IP addresses and port numbers should be used for multicast streams. For

more information, please see the online help .

Bonjour

The network cameras include support for Bonjour. When enabled, the camera is automatically detected by operating systems

and clients that support this.

Storage

The disk management window is used to set up and manage local storage. it is used to connect memory cards for recording

video, monitoring a disk’s status, enabling automatic cleanup and preventing the memory card from being overwritten.

Storage Device

Storage device is used to identify and monitor the status of the SD card. it shows the size of the memory card and how much

free space is available for storage. It is also used to mount and format SD cards for local storage.

Device Settings

Device settings is used to configure removal of recorded video. Automatic disk cleanup can be enabled and set up according to

a schedule, and an SD card can be locked to prevent storage removal.

Ports & Devices

I/O Ports - the pinout, interface support and the control and monitoring functions provided by this connector are described in

I/O terminal connector, on page 6.

LED Settings

The Status indicator LED on the the camera can be set to flash at a configurable interval (or to not light up at all) when the

unit is accessed. For a listing of all LED behavior, see page 6, or the online help. Note that the LED does not flash when the

stream is retrieved using H.264 multicast.

Maintenance

• Restart - the camera is restarted without changing any settings.

• Restore - the unit is restarted and most current settings are reset to factory default values. The settings that do not

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 53 54

No comments

Axis Q1755 User Manual Page 35