Axis Q6035 User Manual Page 40
- Page / 58
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
AXIS Q6035 PTZ Dome Network Camera
System Options
• Synchronize with computer time sets date and time according to the com puter’s clock. With this option, date and
time are set once and will not be updated automatically.
• Synchronize with NTP Server obtains date and time from an NTP server. With this option, date and time settings are
updated continuously. For information on NTP settings, see
NTP Configuration, on page 41
.
If using a host name for the NTP server, a DNS server must be configured. See
DNS Configuration, on page 41
.
• Set manually allows you to manually set date a n d time.
If using an NTP server, select your Time zone from the drop-down list. If required, check Automatically adjust for daylight saving
time changes.
The Date & Time Format Used in Images is the date and time format displayed a s a text overlay in the video stream. Use the
predefined formats or see
File Naming & Date/Time Formats
in the online help for information on how to create c ustom date and
time formats. To include date and time in the overlay text, go to Video & Audio and select Include date and Include time.
Network
Basic TCP/IP Settings
The Axis product supports IP version 4 and IP version 6. Both versions can be enabled simultaneously, and at least one version
must always be enabled.
IPv4 Address Configuration
By default, the Axis product is set to use IPv4 (IP version 4) and to obtain the IP address automatically via DHCP. The IPv4 settings are
configured under System Options > Network > TCP/IP > Basic.
DHCP (Dynamic Host Configuration Protocol) allows network administrators to centrally manage and a utomate the assignment of IP
addresses. DHCP should only be enabled if using dynamic IP address notification,oriftheDCHPcanupdateaDNSserver,which
when allows you to access the Axis product by name (host name).
If DHCP is enabled and the p roduct cannot be accesse d, run AXIS IP Utility to search the network for connected Axis products, or reset
the product to the factory default settings (see
page 47
) and then perform the installation again.
To use a static IP address, check Use the following IP address and s pecify the IP address, subnet mask and default router.
IPv6 Address Con figuration
If IPv6 (IP version 6) is enabled, the Axis product will receive an IP address according to the configuration in the network router.
To enable IPv6, go to System Options > Network > TCP/IP > Basic. Other settings for IPv6 s hould be configured in the network router.
ARP/Ping
The IP address can be set u sing A RP and Ping . For instructions, see the product’s Installation Guide.
ARP/Ping is enabled by default. To disable , uncheck the box under System Options > Network > TCP/IP > B asic.
The ARP/Ping service is automatically disabled two minutes after the product is started, or as soon as an IP address is set. To reset the
IP address, the product must be restarted to activate ARP/Ping for an additional two minutes.
Pinging the product is still possible when this service is disabled.
AXIS Video Hosting System (AVHS)
AVHS used in conjunction with an AVHS service, provides easy and secure Internet access to live and recorded video accessible from
any location. For more information and help to find a local AVHS Service Provider go to www.axis.com/hosting
40
- USER MANUAL 1
- Table of contents 3
- Hardware overview 4
- Connectors 4
- LED indicators 5
- Access from a browser 6
- Access from the Internet 7
- Set the root password 7
- The Live View page 8
- Accessing the product 10
- Media streams 11
- How to stream H.264 11
- AXIS Media Control (AMC) 11
- Accessing audio streams 13
- Setting up the product 14
- Basic Setup 14
- Video Stream 15
- Video and Audio 15
- Stream Profiles 16
- Camera Settings 16
- Privacy Mask 18
- Audio Settings 18
- Audio Clips 20
- Live View Config 21
- PTZ (Pan Tilt Zoom) 24
- PTZ (Pan T ilt Zoom) 24
- Preset positions 24
- Autotracking 24
- Guard Tour 25
- OSDI Zones 26
- Advanced 27
- Control Q ueue 27
- Applications 29
- Event Servers 30
- Event Types 31
- Set up a scheduled event 32
- Save stream 32
- Gatekeeper 33
- Motion detection 33
- Motion detection parameters 34
- Audio detection 35
- Port Status 35
- Recordings 36
- Event recordings 36
- Continuous recording 37
- System Options 38
- Security 38
- Date & Time 39
- Ports & Devices 45
- Maintenance 45
- I/O configured as input 49
- I/O configured as output 49
- Troubleshooting 50
- Checking the firmware 50
- Upgrading the firmware 50
- Emergency recovery procedure 50
- Technical Specifications 54
- Performance considerations 56
Related products and manuals for Security cameras Axis Q6035
Security cameras Axis Q6034-E User Manual
(56 pages)
(56 pages)
Security cameras Axis M3006-V User Manual
(53 pages)
(53 pages)
Security cameras Axis 233D User Manual
(81 pages)
(81 pages)
Security cameras Axis P1347 User Manual
(65 pages)
(65 pages)
Security cameras Axis 231D+ User Manual
(68 pages)
(68 pages)
Security cameras Axis 211M User Manual
(47 pages)
(47 pages)
Security cameras Axis P5522 User Manual
(48 pages)
(48 pages)
Security cameras Axis Q1602 User Manual
(4 pages)
(4 pages)
Security cameras Axis F8203 User Manual
(4 pages)
(4 pages)
Security cameras Axis T8312 User Manual
(10 pages)
(10 pages)
Security cameras Axis 206M User Manual
(41 pages)
(41 pages)
Security cameras Axis P5534 User Manual
(58 pages)
(58 pages)
Security cameras Axis P8524 User Manual
(24 pages)
(24 pages)
Security cameras Axis Q6034-E Installation Guide
(124 pages)
(124 pages)
© 2020, manymanuals.com. All rights reserved. | 0.402 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals