Axis 210/211 User Manual download pdf (Page 11)

AXIS 210/211 - One-click Installation

One-click Installation

Requirements:

The AXIS Internet Dynamic DNS Service

Follow these instructions:

1. Once the network and power cables have been connected (see page 9), wait for the

Status indicator to show a steady green.

2. Now press the Control button on the underside of the camera once

. The Status

indicator on the front of the camera will blink green while it connects to the AXIS

Internet Dynamic DNS Service.

3. Wait for the Status indicator to go back to showing a steady green.

4. To complete the installation, now visit www.axiscam.net from an Internet connected

PC. This must be done within 60 minutes of pressing the Control button.

5. Follow the on-screen instructions provided by the AXIS Internet Dynamic DNS

Service. You will need your product’s serial number to complete the installation.

6. Please see page 15 for instructions on how to set the password.

Note:

If this installation was unsuccessful, try one of the other methods described on the following pages.

Broadband router/modem pro-

viding automatic IP addressing

AXIS 210/211

Network Camera

Internet

Computer

on a LAN

• The One-click installation procedure uses the AXIS Internet Dynamic DNS Service. This free service allows you to quickly

and simply install your camera, which then receives a static name (DNS name) and a dynamic IP address. More

information about the AXIS Internet Dynamic DNS Service is available at www.axiscam.net

• Please note that this procedure will send the AXIS 210/211’s IP address, firmware version, product type and serial

number to the Axis Internet Dynamic DNS Service. No personal information is transferred.

• To remove the DNS name and unregister from the Axis Internet Dynamic DNS Service, open the Setup pages in the AXIS

210, click System Options > Network > TCP/IP, click the Settings button for the AXIS Internet Dynamic DNS Service

and finally, click the Remove button.

The serial number (S/N) is on the label on the underside

of the AXIS 210/211.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 49 50

No comments

Axis 210/211 User Manual Page 11