Axis 210/211 User Manual download pdf (Page 2)

AXIS COMMUNICATIONS

<Product Name> Quick User’s Guide

About this Document

This manual is intended for administrators and users of the

AXIS 210/211 Network Camera, and is applicable for

software release 4.02. It includes instructions for using and

managing the AXIS 210/211 on your network. Previous

experience of networking will be of use when using this

product. Some knowledge of UNIX or Linux-based systems

may also be beneficial, for developing shell scripts and

applications. Later versions of this document will be posted

to the Axis Website, as required. See also the product’s

online help, available via the Web-based interface.

Safety Notices Used In This Manual

Caution! - Indicates a potential hazard that can damage the

product.

Important! - Indicates a hazard that can seriously impair

operation.

Do not proceed beyond any of the above notices until you

have fully understood the implications.

Intellectual Property Rights

Axis AB has intellectual property rights relating to

technology embodied in the product described in this

document. In particular, and without limitation, these

intellectual property rights may include one or more of the

patents listed at http://www.axis.com/patent.htm and one

or more additional patents or pending patent applications

in the US and other countries.

Legal Considerations

Camera surveillance can be prohibited by laws that vary

from country to country. Check the laws in your local

region before using this product for surveillance purposes.

Electromagnetic Compatibility (EMC)

This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful

interference to radio communications. However, there is no

guarantee that interference will not occur in a particular

installation.

If this equipment does cause harmful interference to radio

or television reception, which can be determined by turning

the equipment off and on, the user is encouraged to try to

correct the interference by one or more of the following

measures: Re-orient or relocate the receiving antenna.

Increase the separation between the equipment and

receiver. Connect the equipment to an outlet on a different

circuit to the receiver. Consult your dealer or an

experienced radio/TV technician for help. Shielded (STP)

network cables must be used with this unit to ensure

compliance with EMC standards. If the I/O terminal block

connector is used, a ferrite core (available e.g. from Axis)

should be fitted around the wires in order to ensure

compliance with EMC standards.

USA - This equipment has been tested and found to

comply with the limits for a Class B computing device

pursuant to Subpart B of Part 15 of FCC rules, which are

designed to provide reasonable protection against such

interference when operated in a commercial environment.

Operation of this equipment in a residential area is likely to

cause interference, in which case the user at his/her own

expense will be required to take whatever measures may be

required to correct the interference.

Europe - This digital equipment fulfills the

requirements for radiated emission according to limit B of

EN55022/1998, and the requirements for immunity

according to EN55024/1998 residential, commercial, and

light industry.

Japan - This is a class B product based on the standard of the

Voluntary Control Council for Interference from Information

Technology Equipment (VCCI). If this is used near a radio or

television receiver in a domestic environment, it may cause

radio interference. Install and use the equipment according to

the instruction manual.

Australia - This electronic device meets the requirements of

the Radio communications (Electromagnetic Compatibility)

Standard 1998 AS/NZS 3548.

Liability

Every care has been taken in the preparation of this manual.

Please inform your local Axis office of any inaccuracies or

omissions. Axis Communications AB cannot be held responsible

for any technical or typographical errors and reserves the right

to make changes to the product and manuals without prior

notice. Axis Communications AB makes no warranty of any

kind with regard to the material contained within this

document, including, but not limited to, the implied warranties

of merchantability and fitness for a particular purpose. Axis

Communications AB shall not be liable nor responsible for

incidental or consequential damages in connection with the

furnishing, performance or use of this material.

Trademark Acknowledgments

Acrobat, Adobe, Boa, Ethernet, IBM, Internet Explorer, LAN

Manager, Linux, Macintosh, Microsoft, Mozilla, Netscape

Navigator, OS/2, UNIX, Windows, WWW are registered

trademarks of the respective holders. Java and all Java-based

trademarks and logos are trademarks or registered trademarks

of Sun Microsystems, Inc. in the United States and other

countries. Axis Communications AB is independent of Sun

Microsystems Inc. UPnP is a certification mark of the UPnP

Implementers Corporation.

Support

Should you require any technical assistance, please contact

your Axis reseller. If your questions cannot be answered

immediately, your reseller will forward your queries through

the appropriate channels to ensure a rapid response. If you are

connected to the Internet, you can:

• download user documentation and firmware updates

• find answers to resolved problems in the FAQ database.

Search by product, category, or phrases

• report problems to Axis support by logging in to your private

support area

• visit Axis Support at www.axis.com/techsup/

Safety Notice - Battery Replacement

The AXIS 210/211 uses a 3.0V CR2032 Lithium battery as the

power supply for its internal real-time clock (RTC). Under

normal conditions this battery will last for a minimum of 5

years. Low battery power affects the operation of the RTC,

causing it to reset at every power-up. A log message will appear

when the battery needs replacing.

The battery should not be replaced unless required!

If the battery does need replacing, please observe the following:

• Danger of Explosion if battery is incorrectly replaced

• Replace only with the same or equivalent battery, as

recommended by the manufacturer.

• Dispose of used batteries according to the manufacturer's

instructions.

AXIS 210/211 User’s Manual

Revision 1.0

Part No: 22083

May 2004

1 2 3 4 5 6 7 ... 49 50

Comments to this Manuals

No comments

Axis 210/211 User Manual Page 2

Comments to this Manuals

Related products and manuals for Video servers/encoders Axis 210/211