Axis M1054 User Manual download pdf (Page 16)

AXIS M10 Series - Video & Audio Settings

Video & Audio Settings

This section describes how to configure the camera, and is intended for product Administrators, who have unrestricted access

to all settings; and Operators, who have access to the settings for Basic Setup, Video & Audio and Events.

You can configure the camera by clicking Setup in the top right-hand corner of the Live View page. Click on this page to

access the online help that explains the configuration menus.

Video Stream

The video stream settings appear under four

different tabs:

•Image

• Audio (AXIS M1031-W and AXIS

M1054)

• MPEG-4 & H.264

•MJPEG

Note:

AXIS M1054 does not support MPEG-4.

Image

Image Appearance

Use these settings to modify the image resolution and compression. Setting the compression level affects the image quality

and the amount of bandwidth required; the lower the compression, the higher the image quality with higher bandwidth

requirements.

Mirroring (AXIS M1054 only) - Mirroring is the horizontal flipping of an image, that gives you another image perspective.

This is a useful function when you need a direct view of the image, for example, in ATMs and door phones. Define mirroring

settings before defining parameters for privacy masks and motion detection.

Rotate image - The image can be rotated by selecting one of the available values.

See the online help files for more information.

Video Stream

To avoid bandwidth problems on the network, the frame rate allowed to each viewer can be limited. Select the Unlimited

radio button option to allow the highest available frame rate; or select the Limited to radio button option and enter a value

(1-30) fps in the field.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 58 59

No comments

Axis M1054 User Manual Page 16