Axis M1054 User Manual download pdf (Page 33)

AXIS M10 Series - System Options

A signed certificate can be obtained from an issuing Certificate Authority by clicking the Create Certificate Request button.

When the signed certificate is returned, click the Install signed certificate button to import the certificate. The properties of

any certificates or certificate requests currently resident or installed in the camera can also be viewed by clicking the

Properties... button. The HTTPS Connection Policy must also be set in the drop-down lists to enable HTTPS in the camera.

For more information, please refer to the online help .

Audio Support

Enable audio support - Allow clients to retrieve audio streams from the AXIS M1031-W/AXIS M1054. See also Audio

Settings (AXIS M1031-W and AXIS M1054), on page 19 for information on how to configure the audio settings.

Notes:

• This parameter will enable/disable audio globally in the camera, even for configured events and profiles with audio.

• Disabling audio support will disable audio clips.

Date & Time

Current Server Time - displays the current date and time (24h clock). The time can be displayed in 12h clock format in the

overlay (see below).

New Server Time - select your time zone from the drop-down list. If you want the server clock to automatically adjust for

daylight savings time, select the Automatically adjust for daylight saving time changes.

From the Time Mode section, select the preferred method to use for setting the time:

• Synchronize with computer time - sets the time from the clock on your computer.

• Synchronize with NTP Server - the camera will obtain the time from an NTP server every 60 minutes.

• Set manually - this option allows you to manually set the time and date.

Note:

If using a host name for the NTP server, a DNS server must be configured under TCP/IP settings.

See Network > Basic TCP/IP Settings below.

Date & Time Format Used in Images - specify the formats for the date and time (12h or 24h) displayed in the video streams.

Use the predefined formats or use your own custom date and time formats. See Advanced File Naming & Date/Time Formats

in the online help

for information on how to create your own date and time formats.

Network

Basic TCP/IP Settings

The AXIS M10 Series supports both IP version 4 and IP version 6. Both versions may be enabled simultaneously, and at least

one version must always be enabled. When using IPv4, the IP address for the camera can be set automatically via DHCP, or a

static IP address can be set manually. If IPv6 is enabled, the network cameras receive an IP address according to the

configuration in the network router. There are also the option of using the AXIS Internet Dynamic DNS Service. For more

information on setting the IP address, please see the online help.

Network Settings - Click the View button for an overview of the IP configuration of the network camera.

Network Interface Mode - The network interface to the AXIS M1011-W/AXIS M1031-W Network Camera can be wired or

wireless. Different settings can be used for each network interface, but only one can be used at a time. Check the relevant

radio button to decide how the different network interfaces will be selected.

IPv4 Address Configuration - Ethernet - These settings are grouped according to the network interface and the version

of Internet Protocol (IP). The AXIS M10 Series supports both IP version 4 and IP version 6. Both versions may be enabled

simultaneously, and at least one version must always be enabled.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 58 59

No comments

Axis M1054 User Manual Page 33