Axis M1054 User Manual download pdf (Page 41)

AXIS M10 Series - Resetting to the Factory Default Settings

Caution!

Improper use may cause unexpected behavior or even cause loss of contact with the unit. If a script does cause problems,

reset the unit to its factory default settings. A backup file may be of use to return the unit to its latest configuration.

Axis strongly recommends that you do not use this function unless you understand the consequences. Note that Axis

support does not provide assistance for problems with customized scripts.

For more information, please visit the Developer pages at www.axis.com/developer

File Upload - Files can be uploaded (e.g. web pages and images) to be used as custom settings. Set user level access to

control which files can be viewed by different users.

Plain Config - This function is for the advanced user with experience of Axis network camera configuration. All parameters

can be set and modified from this page. Help is available from the standard help pages.

About

Here you can find basic information about your network camera. You can also view third party software licenses.

Resetting to the Factory Default Settings

To reset the camera to the original factory default settings, go to the System Options > Maintenance web page (as described

in Maintenance, on page 39) or use the Control button (see page 6) as described below:

Using the Control Button

To reset the camera to the factory default settings using the Control Button:

1. Disconnect the power cable, or if using PoE, disconnect the network cable.

2. Press and hold the Control button while reconnecting power.

3. Keep the Control button pressed until the Status Indicator color changes to amber (this may take up to 15

seconds).

4. Release the Control button.

5. When the Status Indicator changes to green (which may take up to 1 minute), the process is complete and the

camera has been reset. The unit now has the default IP address 192.168.0.90

Note:

For other methods of setting the IP address, please refer to the product’s Installation Guide that accompanies the prod-

uct, or download a copy from www.axis.com

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 58 59

No comments

Axis M1054 User Manual Page 41