Axis M3011 Fixed Dome Network Camera User Manual download pdf (Page 13)

AXIS M3011 - Video Streams

AXIS Media Control (AMC)

AXIS Media Control (AMC) in Microsoft Internet Explorer in Windows is

the recommended method of accessing live video from the network

camera.

The AMC control panel can be used to

configure various video and audio

settings. Please see the AMC user manual included in the tool for more

information.

The AMC control panel is automatically install

ed on first use, after which

it can be configured.

Open the AMC Control Panel from:

• Windows Control Panel (from the Start menu)

• Alternatively, right-click the video image in Inter

net Explorer and

click Settings to access the AMC window.

Note:

IS M3011does not support audio.

Motion JPEG

This format uses standard JPEG still images for the video stream. These images are then displayed and updated at a rate

sufficient to create a stream that shows constantly updated motion.

The Motion JPEG stream uses considerable amounts of bandwidth, but

provides excellent image quality and access to every

image contained in the stream. The recommended method of accessing Motion JPEG live video from the network camera is to

use the AXIS Media Control (AMC) in Microsoft Internet Explorer in Windows.

Alternative methods of accessing the video stream

You can also access video/images from the network camera in the following ways:

• Motion JPEG server push (if supported by the client, Firef

ox, for example). This option maintains an open HTTP con-

nection to the browser and sends data as and when required, for as long as required.

• Still JPEG images in a browser. Enter the path -

http://<ip>/axis-cgi/jpg/image.cgi

• Windows Media Player. This requires AMC and the MPEG-4/H.264 viewing client to be installed. The paths that can

used are listed below in the order of preference:

• Unicast via RTP: axrtpu://<ip>/axis-media/media.amp?videocodec=<codec>

•

Unicast via RTSP: axrtsp://<ip>/axis-media/media.amp?videocodec=<codec>

• Unicast via RTSP, tunneled via HTTP: axrtsphttp://<ip>/axis-media/media.amp?videocodec=<codec>

• Multicast: axrtpm://<ip>/axis-media/media.amp?videocodec=<codec>

• To access the video stream from Qu

ickTime™ the following paths can be used:

• rtsp://<ip>/axis-media/media.amp?videocodec=<codec>

• rtsp://<ip>/axis-media/media.3gp?videocodec=<codec>

Notes:

• The network camera supports QuickTime 6.5.1 and later.

• QuickTime adds latency to the video stream (up to 3 seconds).

• It may be possible to use other players to view the MPEG-4/H.264 stream using the paths above, although Axis does

not guarantee this.

• <ip> = IP address

• <codec> = h264 or mpeg4. The default codec is H.264.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 44 45

Comments to this Manuals

No comments

Axis M3011 Fixed Dome Network Camera User Manual Page 13

Comments to this Manuals

Related products and manuals for Security cameras Axis M3011 Fixed Dome Network Camera