Axis M3011 Fixed Dome Network Camera User Manual download pdf (Page 29)

AXIS M3011 - System Options

QoS Settings - For each type of network traffic supported by your Axis network video product, enter a DSCP

(Differentiated Services Codepoint) value. This value is used to mark the traffic’s IP header. When the marked traffic reaches a

network router or switch, the DSCP value in the IP header tells the router or switch the type of treatment to apply to this type

of traffic, for example, how much bandwidth to reserve for it. Note that DSCP values can be entered in decimal or hex form,

but saved values are always shown in decimal.

For more information on Quality of Service,

please see the Axis support web at www.axis.com/techsup

SMTP (email)

Enter the host names (or IP addresses) and port numbers for your primary and secondary mail servers in the fields provided, to

enable the sending of notifications and image email messages from the camera to predefined addresses via SMTP.

If your mail server requires authen

tication, check the box for Use authentication to log in to this server and enter the

necessary information. See the online help for more information.

SNMP

The Simple Network Management Protocol (SNMP) allows remote management of network devices. An SNMP community is

the group of devices and management station running SNMP. Community names are used to identify groups.

Depending on the level of security required, select the version of SNMP to use. The

three levels of security are:

SNMP v1/v2

Select either SNMP V1 that includes no security, or SNMP V2c

that uses very simple security.

The community name can be specified as a password for read or read/write access to all supported SNMP objects. The

community is the group of network devices using SNMP. The default password for the Read Community is public and the

default password for the Write community is write.

Traps for SNMP v1/v2

Traps are used by the camera to send messages to a manage

ment system for important events or status changes.

If En

able traps is selected, enter the email address where the trap message is to be sent as well as the Trap community that

should receive the message.

There are four types of traps available for the AXIS M3011.

• Cold start

•Warm start

•Link up

• Authentication failed

SNMP v3

SNMP V3 - provides encryption and secure passwords. HTTPS must

be enabled. To use traps with SNMP v3 an SNMP v3

management application is required.

If the Enable S

NMP v3 option is enabled, provide the Initial user password. Note that the initial password is activated only

when HTTPS is enabled and can only be set once.

If HTTPS is enabled, SNMP v1 and

SNMP v2c should be disabled.

When SNMP configuration is ready, click Save to u

se the new settings or Reset to return to the default values.

UPnP™

The network camera includes support for UPnP™. UPnP™ is enabled by default, and the network camera then is automatically

detected by operating systems and clients that support this protocol.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 44 45

Comments to this Manuals

No comments

Axis M3011 Fixed Dome Network Camera User Manual Page 29

Comments to this Manuals

Related products and manuals for Security cameras Axis M3011 Fixed Dome Network Camera