AXIS M5013 PTZ Dome Network Camera
Events
Event Types
An Event Type describes how and when the Axis product performs certain actions.
Example
If somebody passes in front of the camera and an event has been configured to detect and respond to motion, the Axis product can
recordandsaveimagestoanFTPserverandsendanotification email. Images can be sent as email attachments.
Set up a triggered event
The following example describes how to configure the Axis product to upload images when motion is detected.
1. Go to Events > Motion Detection and s et up a motion detection window. See
Set up motion detection, on page 25
.
2. Go to Events > Event Types and click Add triggered.
3. Enter a descriptive name for the event, for example Motion detected.
4. Set the Priority — high, normal or low.
5. Set the Respond to Trigger para mete rs to define when the event is active, for example, after office hours.
6. Select Motion detection from the Triggered By list. Select the desired motion detection window and indicate if the e v ent
should be triggered when motion starts or stops
(or both).
7. Set the When Triggered parameters, that i
s, defi ne what the product should do when motion is detected. To upload images,
select Save stream and enter the r equired information. See
Save stream
.
8. Click OK to save the e vent.
Note
• Up to 10 event types can be configured, and up to 3 of these can be configured to upload images.
• Filenamescanbeformattedaccordingtospecific requirements. See
File Naming & Date/Time Formats
in the online help.
Set up a scheduled event
A scheduled event can be activated at preset times, in a repeating pattern on selected weekdays.
The f ollowing example describes how to configure the Axis product to upload images from pre-programmed time periods.
1. Go to Events > Event Types a n d click Add scheduled.
2. Enter a descriptive name for the event, for example Scheduled email upload.
3. Set the Priority — high, normal or low.
23
Comments to this Manuals