Axis T8125 Installation Guide download pdf (Page 8)

Page 8 AXIS T8125 AC 24 V Midspan 60 W

Caution!

• Read the Installation Guide and the Safety Information

before connecting the AXIS T8125 to its power source.

• Follow basic electricity safety measures when connecting the AXIS

T8125 to its power source.

• A voltage mismatch can cause equipment damage and may pose a

fire hazard. If the voltage indicated on the label is different from

the power outlet voltage, do not connect the AXIS T8125 to this

power outlet.

• Take extra care when connecting the power inlet terminals, so LINE

(L) or NEUTRAL (N) are not touching the chassis ground.

Mounting Instructions

The AXIS T8125 may be located on a desktop, or wall/bench mounted

using the mounting slots on the back of the AXIS T8125.

1. Mount two screws (not included) in the wall or shelf as shown in

Figure 1.

2. Align the AXIS T8125 mounting slots with the surface screws and

adjust the AXIS T8125 so it is securely attached to the wall/bench.

91.7 mm

(3.61”)

5.8 - 7 mm

(0.23” - 0.27”)

3 mm

(0.12”)

1.5 - 2 mm

(0.06” - 0.08”)

2 mm

(0.08”)

Figure 1

Screw dimensions Screw placement

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

No comments

Axis T8125 Installation Guide Page 8