Axis P1311 User Manual download pdf (Page 15)

AXIS P1311 - Video & Audio settings

whilst the value 100 gives maximum color saturation.

Brightness - The image brightness can be adjusted in the range 0-100, where a higher value produces a brighter image.

Sharpness - Controls the amount of sharpening applied to the image. A sh

arper image might increase image noise especially

in low light conditions. A lower setting reduces image noise, but the image would be less sharp.

Contrast - Adjust the image's contrast by

raising or lowering the value in this field.

Rotate image - The image can be rotated to the correct orientation. Sel

ect the appropriate value from the drop-down list.

White balance

This is used to compensate for the different colors present in different light sources, to make the colors in the image appear

the same. The AXIS P1311 can be set to automatically identify the light source and compensate for its color. Alternatively, the

type of light source can be manually selected from the drop-down list. Please see the online help files for a description of

each available setting.

Exposure Settings

Configure the exposure settings to suit the image quality requirements in relation to lighting, frame rate and bandwidth

considerations.

Exposure value - Increasing the exposure will improve image quality at t

he expense of the total frame rate. There may also

be an increase in motion blur.

Exposure control - this setting is used to adapt to the amount/type

of light being used. Allow slow shutter can be

enabled/disabled when the exposure control is set to Automatic.

Enable Backlight compensation - Backlight compensation makes the subject appea

r clearer when the image background is

too bright, or the subject too dark.

Exposure zones - this setting determines which part of the image

is used to calculate the exposure.

Exposure priority - This defines the balance between image quality and th

e frame rate. When Motion is prioritized, motion

blur is minimized, but the image quality may be reduced with a higher frame rate. A prioritized Low noise will provide

better image quality with a lower frame rate.

View Image Settings

Click View to view the video stream with the current configuration. Once satisfied, click Save.

Overlay Image

An overlay image is a static image superimposed over the video image. An overlay can be used to provide extra information, or

to mask a part of the video image.

To use an overlay image in the AXIS P1311 Network Camera, it

must be selected from the drop-down list of available images.

The overlay (a logo, for example) is then displayed in the video image.

To use your own image, first upload it to the AXIS P1311 Network Camera. To upload en

ter the name of the file in the field

provided, or click the Browse button, locate and click the Upload button.

Image Overlay Placement

- To place the overlay image at specific coordinates in the live view image, check Include overlay

image at the coordinates and enter the X and Y coordinates.

Click Vie

w to view the overlay image in the video stream. Once satisfied, click Save.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 52 53

Comments to this Manuals

No comments

Axis P1311 User Manual Page 15

Comments to this Manuals

Related products and manuals for Security cameras Axis P1311