Axis Print Server 5470e User Manual download pdf (Page 225)

AXIS 5470e User’s Manual Section 21: DBCS Support

225

Amending Device Features

After automatic setup, it may be necessary to change the Device

features and Last Code Point of the printer device. Failure to do so

may cause corruption within your print data.

Follow the instructions below, to set the appropriate Device features

and Last Code Point for your chosen printer device:

1. Make sure that the writer is stopped by typing ENDWTR

xxxxPRT01 on the AS/400 command line, where xxxxPRT01

is the printer device name. Press ENTER.

2. Type VRYCFG CFGOBJ(xxxxPRT01) CFGTYPE(*DEV)

STATUS(*OFF) to vary off the printer device, where

xxxxPRT01 is the printer device name. Press ENTER.

3. Type CHGDEVPRT xxxxPRT01 to change the printer device

name, where xxxxPRT01 is the printer device name. Press F4.

4. Under DBCS Feature (IGCFEAT) amend the Device Features and

Last Code Point to the appropriate value corresponding to the

country language.

Device features and Last Code Point for Country options

5. Type VRYCFG CFGOBJ(xxxxPRT01) CFGTYPE(*DEV)

STATUS(*ON) on the AS/400 command line to vary on the

printer device, where xxxxPRT01 is the printer device name.

Press ENTER.

6. Type STRPRTWTR xxxxPRT01 to start the Writer, where

xxxxPRT01 is the printer device name. Press ENTER.

7. Direct a printout to this printer device to confirm that the above

changes have been implemented correctly.

Country Device features Last Code Point

Korea 2424K1 D3FE

Japan 2424J1 68FE

China 2424S1 6FFE

1 2 ... 220 221 222 223 224 225 226 227 228 229 230 ... 266 267

No comments

Axis Print Server 5470e User Manual Page 225