Axis Print Server 5470e User Manual download pdf (Page 97)

AXIS 5470e User’s Manual Section 6: Setting Up - NetWare

Setup using NDPS

The AXIS 5470e supports Novell Distributed Print Services (NDPS),

which is Novell’s new generation architecture for printing and printer

administration. You can run NDPS over Pure IP (TCP/IP) or IPX/SPX.

Before the AXIS 5470e can be installed, make sure that NDPS is

installed and a Broker is loaded on your NetWare file server.

AXIS 5470e uses the AXIS NDPS Gateway for printing in networks

using either IP or IPX as transport protocols. The printer gateways are

included with the NDPS software (from version 5.1 and up) and are

automatically installed together with NDPS.

Notes:

Installing the AXIS 5470e in an NDPS environments

Having assigned an IP address to the AXIS 5470e as described in

Assigning an IP address, on page 20, you are now ready to install the

AXIS 5470e for NDPS printing. You can select to install the connected

printers as public or controlled access printers. Follow the

instructions below to install the AXIS 5470e using NDPS:

Notes:

• NDPS requires that you run NetWare 4.11 or higher.

• Pure IP is only supported by NetWare 5 or higher.

• The HP-JETADMIN parameter of the AXIS 5470e must be set to YES in order for the

communication between the AXIS 5470e and the NDPS gateway to be enabled. Set this

parameter in the print server’s internal web pages: admin | General Settings | HP

JetAdmin Support (default value=NO)

• If you do not have an NDPS Manager object available, start out with creating one in the

NetWare Administrator.

1 2 ... 92 93 94 95 96 97 98 99 100 101 102 ... 266 267

No comments

Axis Print Server 5470e User Manual Page 97