Axis Q1604 Installation Guide download pdf (Page 10)

Page 10 AXIS Q1602/Q1604 Network Camera Installation Guide

AXIS Camera Management - multiple cameras/large installations

AXIS Camera

Management

can

automatically

discover

multiple Axis

devices, show

connection

status, manage

firmware

upgrades and

set IP

addresses.

Automatic discovery

1. Check that the camera is connected to the network and that power has been applied.

2. Start AXIS Camera Management. When the network camera appears in the window, right-click

the link and select Live View Home Page.

3. See page 11 for instructions on how to set the password.

Assign an IP address in a single device

1. Select the network camera in AXIS Camera Management and click

the Assign IP button .

2. Select Assign the following IP address and enter the IP address, the

subnet mask and default router for the device.

3. Click OK.

Assign IP addresses in multiple devices

AXIS Camera Management speeds up the process of

assigning IP addresses to multiple devices, by suggesting

IP addresses from a specified range.

1. Select the devices you wish to configure (different

models can be selected) and click the Assign IP

button .

2. Select Assign the following IP address range and

enter the range of IP addresses, the subnet mask and

default router the devices will use.

3. Click Update. Suggested IP addresses are listed under

New IP Addresses and can be edited by selecting a

device and clicking the Edit button.

4. Click OK.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 103 104

No comments

Axis Q1604 Installation Guide Page 10