Axis Q1604 Installation Guide download pdf (Page 9)

AXIS Q1602/Q1604 Network Camera Installation Guide Page 9

ENGLISH

AXIS IP Utility - single camera/small installation

AXIS IP Utility automatically discovers and displays Axis devices on your network. The application

can also be used to manually assign a static IP address.

Note that the computer running AXIS IP Utility must be on the same network segment (physical

subnet) as the network camera.

Automatic discovery

1. Check that the network camera is connected to the network and that power has been applied.

2. Start AXIS IP Utility.

3. When the network camera appears in the window, double-click to open its home page.

4. See page 11 for instructions on how to assign the password.

Set the IP address manually (optional)

1. Acquire an unused IP address on the same network segment as your computer.

2. Select the network camera in the list.

3. Click the button Assign new IP address to selected device and enter the IP address.

4. Click the Assign button and proceed according to instructions.

5. Click the Home Page button to access the camera’s web pages.

6. See page 11 for instructions on how to set the password.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 103 104

No comments

Axis Q1604 Installation Guide Page 9