Axis 7100 Specifications download pdf (Page 6)

Daily Maintenance Procedures (page 1 of 3)

Advanced Dicing Technologies Ltd.

3.1-2

Daily Maintenance Procedures

(page 2 of 3)

Maintenance Technician Name: ________________________

Date: ________________________

Daily Maintenance Procedures

Examine Procedure & Specifications Passed

Water leaks inside the

System

Open the Front Door and remove the

Front Bottom Cover to inspect the

Electronic Bench and the X Casting

gutter for signs of leakage. Inspect the

X Casting gutter for signs of blockage

or for a kink in the Drainage Tube.

Remove the Rear Side Lower Left

Panel and inspect the area of the

Pneumatic Panel for signs of leakage.

Cleaning Dicer

Remove all waste material that has

collected on the X Bellows.

Clean the collecting waste filter pan.

Use a sponge and clean water (DI

water recommended) to remove

sediment from:

• X Protector

• Cooling Block (metal parts)

• Internal Covers

• Wheel Mount

Cleaning Microscope

Lens

Clean the Microscope lens with a

cotton swab and isopropyl alcohol.

Height Device

For Systems with an optical,

Non-Contact Height Device:

Clean the internal vertical prism

surfaces with a cotton swab and

isopropyl alcohol and water. Clean

only the internal vertical surfaces that

face each other. Do not clean the two

external angled surfaces.

For Systems with a Mechanical Button:

Clean the surface of the Button with a

cotton swab, isopropyl alcohol and

water.

1 2 3 4 5 6 7 8 9 10 11 ... 19 20

Comments to this Manuals

No comments