Axis P5522 User Manual download pdf (Page 26)

AXIS P5522–E PTZ Dome Network Camera

Events

4. Set the Activation Time parameters (24h clock) for the event. For example, select Recurrence pattern and let the event

start on Sundays at 13.00 with a duration of 12 hours.

5. Set the When Activated parameters, that is, deﬁne what the product should do when motion is detected. To upload images,

select Save stream and enter the required information. See Save stream.

6. Click OK to save the event.

Save stream

To upload images to an FTP or HTTP server, save the video stream to the SD card or send images by email, check the Save stream box.

Pre-trigger and post-trigger buffers are useful when checking to see w hat happened immediately before and after a trigger . All

uploaded images are JPEG images.

Image frequency - Set the image frequency to a desired frame rate. The frame rate will be the best possible, but might not be a s

high as speciﬁed, especially if uploading via a slow connection.

Include pre-trigger buffer - Images stored internally in the p roduct from the time immediatel y preceding the trigger. Check the box

to enable the pre-trigger buffer a nd specify the buffer length in seconds, minutes or hours.

Include post-trigger buffer - Images stored internally in the product from the time immediately after the trigger. Check the box to

enable the post-trigger buffer and specify the buffer length in seconds, minutes or hours.

Note

• Pre-trigger and post-trigger buffers will be lost if the connection to the event server fails.

• The maximum length of the pre-/post-trigger buffer depends on the video image size and selected frame rate.

• If the pre- or post-buffer is too large for the product’s internal memory, the frame rate is reduced and individual images

may be missing. If this occurs, an entry is created in the product’s log ﬁle.

Continue image upload (unbuffered) - Upload video images f or a ﬁxed length of time or for as long as the trigge r is active.

Select type - Upload images to an FTP or HTTP server, s end images by email or save the video stream to the SD card.

Create folder - Images uploaded to FTP and HTTP servers can be saved t o designated folders. Folders can, for example, be named

using the current date and time, see File Naming & Date/Time Formats intheonlinehelp.

Base ﬁle name - Used to name all upload ed images. Add a sufﬁxoruseyourownﬁle format to give the images unique names, see

File Naming & Date/Time Formats in the online help.

Use stream proﬁle - Select the stream proﬁle to upload, send as email or save to the SD card. When saving to the SD card, the video

format mu st ﬁrst be selected. For informatio n on stream proﬁles, see Stream Proﬁles, on page 15.

Gatekeeper

The Gatekeeper m onitors an area such as an entrance gate. It can pan, tilt and zoom in, and take a snapshot of, for example, a

face, triggered

by movement in the area. The camera will then automatically return to the home position and continue to overview

the monitored area.

To conﬁgure the Gatekeeper, follow the online instructions under Events > Gatekeeper.

otion detection

Motiondetectionisusedtogenerateanalarmwhenevermovementoccurs(orstops)intheview.Upto10IncludeandExclude

windows can be conﬁgured:

• Include windows — target speciﬁc areas within the whole video image

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 47 48

No comments

Axis P5522 User Manual Page 26