Axis 2110 User's Guide download pdf (Page 15)

AXIS 2110 User’s Manual Other Methods of Setting the IP Ad-

Using BOOTP in UNIX

Follow these steps to use the BOOTP method:

1. Append the following entry to your boot table. This is typically done using the file

/etc/bootptab:

where:

Example!

2. If necessary, update your host table and alias name databases according to the

requirements of your system.

3. If it is not already running, start the BOOTP daemon. This is typically done using the

command

bootpd.

4. Restart the AXIS 2110 to download the IP address, default router address, and subnet

mask.

Mapping a Host Name to the IP Address

If you are using host names, you can also map a unique host name to the acquired IP

address. Refer to your system manuals or Network Administrator for instructions on how

to perform the name mapping on your particular system.

<host name>:ht=<hardware type>:vm=<vendor magic>:\

:ha=<hardware address>:ip=<IP address>:\

:sm=<subnet mask>:gw=<gateway field>

ht = ether

vm = rfc1048

ha = The Ethernet address of the AXIS 2110

ip = The IP address of the AXIS 2110

sm = The subnet mask

gw = The default router address

mycam:ht=ether:vm=rfc1048:\

:ha=00408c100086:ip=172.21.1.200:\

:sm=255.255.255.0:gw=172.21.1.1

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 58 59

No comments

Axis 2110 User's Guide Page 15