Axis 2110 User's Guide download pdf (Page 16)

Other Methods of Setting the IP Address AXIS 2110 User’s Manual

Notes for Macintosh Users

The AXIS 2110 supports TCP/IP over Ethernet, or PPP Modem dial-up. You must use

TCP/IP on your Macintosh network, as there is no support for AppleTalk.

When using the AXIS 2110 on a Macintosh, please observe the following points:

• The camera has a default IP address of 192.36.253.80.

• Assign a temporary IP address in the same subnet (e.g. 192.36.253.81) to a Mac workstation

and then connect to the camera.

• Run the Installation wizard and set the desired IP address for the camera.

• Also reset the correct IP address for the Macintosh workstation.

• Changing the IP address for a Macintosh is simple and there is no need to reboot.

Currently there are limitations in the ActiveX Support in Internet Explorer running on the

Macintosh. This results in problems when viewing live moving images. The recommended

solution for viewing Axis cameras on the Macintosh is to use Netscape.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 58 59

No comments

Axis 2110 User's Guide Page 16