Axis P5522 User Manual download pdf (Page 33)

AXIS P5522–E PTZ Dome Network Camera

System Options

If using an NTP server, select your Time zone from the drop-down list. If required, check Automatically adjust for daylight saving

time changes.

The Date & Time Format Used in Images is the date and time format displayed as a text overlay in the video stream. Use the

predeﬁned formats or see File Naming & Date/Time Formats in the online help

for information on how to create custom date and

time formats. To include date and time in the overlay text, go to Video and select Include date and Include time.

Network

Basic TCP/IP Settings

The Axis product supports IP version 4 and IP version 6. Both vers ions can be enabled simultaneously, and at least one version

must always be enabled.

IPv4 Address Conﬁguration

By default, the Axis product is set to use IPv4 (IP version 4) and to obtain the IP address automatically via DHCP. The IPv4 settings are

conﬁgured under System Options > Network > TCP/IP > Basic.

DHCP (Dynamic Host Conﬁguration Protocol) allows network administrators to centrally manage and automate the assignment of IP

addresses. DHCP should only be enabled if using dynamic IP address notiﬁcation,oriftheDCHPcanupdateaDNSserver,which

when allows you to access the Axis product by name (host name).

If DHCP is enabled and the product cannot be access e d, run AXIS IP Utility to search the ne twork for connecte d Axis products , or reset

the product to the factory default settings (see page 39) and then perform the installation again.

To use a static IP addr ess, check Use the following IP a ddress and specify the IP address, subnet mask and default router.

IPv6 Address Con ﬁguration

If IPv6 (IP version 6) is enable d, the Axis product will receive an IP address according to the conﬁguration in the network router.

To enable IPv6, go to System Options > Network > TCP/IP > Basic. Other settings for IPv6 should be conﬁg ured in the network router.

ARP/Ping

The IP address can be set using ARP and Ping. For instructions, see the product’s Installation Guide.

ARP/Ping is enabled by default. To d isa b le , uncheck the box under System Options > Network > TCP/IP > Basic.

The ARP/ P ing service is automatically disabled two minutes after the product is started, or as soon as an IP address is set. To reset the

IP address, the product must be restarted to activate ARP/Ping for an additional two minutes.

Pinging the product is still possible when this service is disabled.

AXIS Video Hosting System (AVHS)

AVHS used in conjunction with an AVHS service, provides easy and secure Internet access to live and recorded video accessible from

any location. For more information and help to ﬁnd a local AVHS Service Provider go to www.axis.com/hosting

AVHS is enabled by default. The settings are conﬁgured under System Options > Network > TCP IP > Basic.

One-click enabled - Press the product’s contro l button (see Hardware overview, on page 4 ) to connect to an AVHS service over the

Internet. Once registered, Always will be enabled and the Axis product stays connected to the AVHS service. If the product is not

registered within 24 hours from w hen the button is pressed, the product will disconnect from the AVHS service.

Always - The Axis product will constantly attempt to connect to the AVHS service over the Internet. Once registered the product will

stay connected to the service. This option can b e used when the product is already installed and it is not convenient to use the

one-click installation.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 47 48

No comments

Axis P5522 User Manual Page 33