Axis 7100 User Manual download pdf (Page 28)

Basic Installation AXIS 7100 User’s Manual

1. Edit or create a scope in the DHCP manager of the DHCP

daemon. For Windows NT servers, refer to the “Windows NT

Resource Kit” on how to do this. The entries made in this

scope typically include the following parameters:

• Range of IP addresses

•Subnet mask

• Default router IP address

• Lease duration

• Mail server IP address

• DNS server IP address

• Domain name

• NTP server IP address

2. Activate the scope.

Notes:

Using ARP in Windows In Windows 95/98 and Windows NT, you can download the IP

address using ARP. Perform the following commands to

download the IP address and verify the communication.

Important!

From the DOS prompt,

type the following:

• DHCP is enabled by default but can be disabled by an Administrator

using the System Settings page.

• The IP address and all the other settings will be downloaded automat-

ically. You do not need to restart the AXIS 7100.

Windows 95 only: If the ARP table is empty, you must first ping an existing unit on your

network before setting the IP address of your AXIS 7100. Type

arp -a to display the ARP

table.

arp -s <Internet address> <Ethernet address>

ping <Internet address>

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 180 181

No comments

Axis 7100 User Manual Page 28