Axis 7100 User Manual download pdf (Page 31)

AXIS 7100 User’s Manual Basic Installation

2. If necessary, update your host table and alias name databases

as required by your system.

3. Start the RARP daemon, if it is not already running. This is

typically performed using the command

rarpd -a

4. Restart the AXIS 7100 to download the IP address.

Note:

Using BOOTP

in UNIX

Follow these steps to download the IP address using the BOOTP

method:

1. Append the following entry to your boot table. This is

typically performed by editing the file

/etc/bootptab.

where:

Example:

2. If necessary, update your host table and alias name databases

as required by your system.

RARP is enabled by default but can be disabled by an Administrator using

the System Settings page.

<host name>:ht=<hardware type>:vm=<vendor magic>:\

:ha=<hardware address>:ip=<Internet address>:\

:sm=<subnet mask>:gw=<gateway field>

ether for Ethernet

vm rfc1048

The Ethernet or node address, i.e. the AXIS 7100 serial number

The IP address of the AXIS 7100

The subnet mask

The default router address

spserv:ht=ether:vm=rfc1048:\

:ha=00408c24c01c:ip=172.16.253.80:\

:sm=255.255.0.0:gw=172.16.253.254

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 180 181

No comments

Axis 7100 User Manual Page 31