Axis Q7414 User Manual download pdf (Page 28)

AXIS Q7414 - Events

Events

An event or Event Type in the video encoder blade triggers actions when activated. An event type is a set of parameters that

defines the actions. A common event type is an alarm that causes the video encoder to upload images. Many event types use

an Event Server, to receive uploaded images.

This section describes how to conf

igure AXIS Q7414 to perform certain actions when events occur.

Definitions

Event type A set of parameters describing how and when the video encoder performs certain actions

Triggered Event - see page 29

An event that is started by some sort of signal, for e

xample, an external device such as a door switch,

motion detection, or system event.

Scheduled Event - see page 30 Pre-programmed time period(s) during which an event will run.

Action This occurs when the event runs, for

example, uploading of images to an FTP server, or email notification.

Event Servers

Event Servers are used to receive uploaded image files and/or notification messages. To set up Event Server connections in the

video encoder, go to Setup > Events > Event Servers and enter the required information for the required server type.

Server type Purpose Information required

FTP Server • Receives uploaded images • Descriptive name of your choice

• Network address (IP address or host name)

• User Name and Password

HTTP Server • Receives notification messages

• Receives uploaded images

• Descriptive name of your choice

• URL (IP address or host name)

• User Name and Password

TCP Server • Receives notification messages • Descriptive name of your choice

• Network address (IP address or host name)

• Port number

For details on each setting, see the online help available from each web page.

When the setup is complete, the connection can be tested by clicking the Te

st button (the connection test takes

approximately 10 seconds).

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 55 56

No comments

Axis Q7414 User Manual Page 28