Axis Q7414 User Manual download pdf (Page 38)

AXIS Q7414 - System Options

Use NAT traversal when your video encoder is located on an intranet (LAN) and you wish to make it available from the other

(WAN) side of a NAT router. With NAT traversal properly configured, all HTTP traffic to an external HTTP port in the NAT router

is forwarded to the video encoder.

LAN (Intranet)

WAN (Internet)

Broadband

(NAT)

router

ISP

Notes:

• For NAT traversal to work, this must be supported by the broadband router.

• The broadband router has many different names: “NAT router”, “Network router“, Internet Gateway”, “Broadband

sharing device” or “Home firewall” but the essential purpose of the device is the same.

Enable/Disable

- when enabled, the video encoder attempts to configure port mapping in a NAT router on your network, using

UPnP™. Note that UPnP™ must be enabled in the video encoder (see System Options > Network > UPnP).

Use manually selected NAT router - select this option to

manually select a NAT router and enter the IP address for the router

in the field provided.

If a router is not manually specified, the video encoder blade automatically sear

ches for NAT routers on your network. If more

than one router is found, the default router is selected.

Alternative HTTP port - select this option to manually define an external HTTP por

t. Enter the port number in the field

provided. If no port is entered here a port number is automatically selected when NAT traversal is enabled.

Notes:

• An alternative HTTP port can be used/be active even if NAT tr

aversal is disabled. This is useful if your NAT router

does not support UPnP and you need to manually configure port forwarding in the NAT router.

• If you attempt to manually enter a port that is already in

use, another available port is automatically selected.

• When the port is selected automatically it is displayed

in this field. To change this enter a new port number and

click Save.

FTP - The FTP server running in the video encoders enables the upload of new firmware, and user applications. Check the box

to enable the service.

RTSP - The RTSP protocol allows a connecting client to start an H.264 stream. Check the box to enable the server and enter

the RTSP port number to use. The default setting is 554. Note that H.264 video streams will not be available if this service is

not enabled.

SOCKS

SOCKS is a networking proxy protocol. The Axis video encoder blade can be configured to use a SOCKS server to reach

networks on the other side of a firewall/proxy server. This functionality is useful if the video encoder blade is located on a

local network behind a firewall, and notifications, uploads, alarms, and such need to be sent to a destination outside the local

network (such as the Internet). See the online help

for more information.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 55 56

Comments to this Manuals

No comments

Axis Q7414 User Manual Page 38

Comments to this Manuals

Related products and manuals for Video servers/encoders Axis Q7414