Axis Q7414 User Manual download pdf (Page 7)

AXIS Q7414 - Accessing the video encoder blade

Setting the root password

1. When accessing the video encoder for the first time, the ‘Configure Root Password’ dialog appears.

Note:

Before you enter your password at this point

, you can secure configuration of the root password via HTTPS by creating

a self-signed certificate. To do so, click the Create self-signed certificate... button in the Create Certificate window,

and provide the requested information.

2. Enter a password and re-enter to confirm. Click OK.

The

Enter Network Password dialog appears.

3. Enter the password set in step 2, and click OK.

If the

password is lost, the video encoder must be reset to the

factory default settings. See page 38.

Notes:

• The default administrator user name ‘ro

ot’ is permanent

and cannot be deleted.

• After setting the root password, click Yes to install AXIS

edia Control (AMC), if prompted to do so. You will need

administrator rights on the computer to do this.

Access from the Internet

Once connected, the video encoder is accessible on your local network (LAN). To access the video encoder from the Internet

you must configure your broadband router to allow incoming data traffic to the video encoder. To do this, enable the

NAT-traversal feature, which will attempt to automatically configure the router to allow access to the video encoder. You

enable this feature from Setup > System Options > Network > TCP/IP Advanced in the web interface.

For more information, please see NAT traversal (port mapping) for IPv4, on page

37. See also AXIS Internet Dynamic DNS

Service at www.axiscam.net

For Technical notes on this and other topics, visit Axis Support web at www.axis.com/techsup

1 2 3 4 5 6 7 8 9 10 11 12 ... 55 56

No comments

Axis Q7414 User Manual Page 7