Axis 950 User Manual download pdf (Page 14)

Section 2: Basic Installation

14 AXIS 850/950 User’s Manual



Connecting the Axis CD-ROM Server to the Network

Before you begin

• Make sure that your network is ready to accept a new node.

• Any network configuration should always involve the Network

Administrator.

Ethernet

The AXIS 850 and AXIS 851 CD-ROM Servers have AUI and

10baseT connectors. 10base2, 10base5 or optical fibre connectivity is

achieved by using an external transceiver.

Token Ring

The Axis 950 and Axis 951 CD-ROM Servers have connectors for

STP (Media Type 1) and UTP (Media Type 3).

To connect the Axis CD-ROM Server to your network follow these

steps:

1. Disconnect the CD-ROM server power supply to turn the

server off.

2. Record the CD-ROM server serial number.

You will need this

number during the network configuration. The number is found

on the label on the back of the server.

3. If you have a Token Ring network, set the Ring Speed Switch

on the back panel of your AXIS 950 or AXIS 951 CD-ROM

Server to the ring speed of your network (4 or 16 Mb/s).

Caution

❏

Do NOT change the Ring Speed Switch setting when the power

is on or the CD-ROM server is connected to the network.

4. Connect the network cable to the appropriate connector.

5. Connect power to the Axis CD-ROM Server.

The installation is now completed. Proceed with the configuration

according to sections 3, 4 and 5.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 68 69

No comments

Axis 950 User Manual Page 14