Axis 950 User Manual download pdf (Page 56)

Appendix A: Trouble-shooting

56 AXIS 850/950 User’s Manual

SNA

Errors When Accessing the CD-ROM Server

If you get error messages when trying to access the CD-ROM server or

any inserted CD-ROM, please make sure that you have assigned a

unique Internet Address to the CD-ROM server. See also “UNIX

Systems” on page 17.

You should also check the SCSI chain and ensure that all external CD-

ROM drives are switched on and that only the last unit is terminated.

Make sure that the external drives are switched on before the Axis

CD-ROM server. If you are using an Axis 851 or Axis 951 CD-ROM

Server with external CD-ROM drives, check that the internal

termination is off. See also “SCSI Devices and Termination” on page

12.

Please note that Microsoft Windows Network (NetBEUI) must be

enabled to access the CD-ROM server using SMB.

CD-ROM Software Will Not Run

If you have successfully inserted a CD-ROM, but the software on it

refuses to run or produces error messages, the software may expect the

CD-ROM data to be at root level. In the Microsoft and IBM network

operating system environments, you will then have to assign a drive

letter to that particular disk. See “Accessing CD-ROMs” on page 25.

Please note that some CD-ROM software, for example the single user

version of “Computer Select”, will not run on a CD-ROM server.

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 68 69

No comments

Axis 950 User Manual Page 56