Axis 950 User Manual download pdf (Page 20)

Section 3: Network Configuration

20 AXIS 850/950 User’s Manual



Set the Internet

Address Using the

rarp Method

Follow these steps to use the rarp method.

1. Append the following line to your Ethernet address or Node

address table (typically

/etc/ethers):

Example

2. Update your host table and alias name data bases as described

above.

3. Start the rarp daemon (if not already running), typically by

the command: rarpd -a

4. Restart the Axis CD-ROM Server to download the Internet

address.

Setting the Internet

Address Using the

bootp Method

Follow these steps to use the bootp method:

1. Append the following entry to your boot table (typically

/etc/bootptab):

Example (Ethernet):

Example (Token Ring):

00:40:8c:11:00:86 cdserv

<host name>:ht=<hardware type>:vm=<vendor magic>:\

:ha=<hardware address>:ip=<Internet address>:\

:sm=<subnet mask>:gw=<gateway field>

cdserv:ht=ether:vm=rfc1048:\

:ha=00408c110086:ip=192.36.253.96:\

:sm=255.255.255.0:gw=192.36.253.254

cdserv:ht=tr:vm=rfc1048:\

:ha=00408c110086:ip=192.36.253.96:\

:sm=255.255.255.0:gw=192.36.253.254

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 68 69

No comments

Axis 950 User Manual Page 20