Axis 950 User Manual download pdf (Page 2)

2 AXIS 850/950 User’s Manual



CD-ROM

Server



3. Network Conﬁguration

– How to integrate the CD-ROM server in your network

environment.

4. Using the Axis CD-ROM server

– How to access CD-ROM data.

5. Access Control and Set-up

– How to conﬁgure the CD-ROM server.

Every care has been taken in the preparation of this manual; if you detect any inaccuracies or

omissions, please inform us at the address on the back cover. Axis Communications AB cannot

be held responsible for any technical or typographical errors and reserves the right to make

changes in this manual and to the product without prior notice.

Electromagnetic Compatibility (EMC) Notices

USA

This equipment generates, uses, and can radiate radio frequency energy and if not installed and used in accordance with the

instruction manual, may cause interference to radio communications. It has been tested and found to comply with the limits for a

Class A computing device pursuant to Subpart B of Part 15 of FCC rules, which are designed to provide reasonable protection against

such interference when operated in a commercial environment. Operation of this equipment in a residential area is likely to cause

interference in which case the user at his own expense will be required to take whatever measures may be required to correct the

interference. Shielded cables should be used with this unit to ensure compliance with the Class A limits.

Europe

This digital equipment fulfils the requirements for radiated emission according to limit B of EN55022/1987, and the requirements

for immunity according to EN50082-1/1992 residential, commercial, and light industry. (Compliance is not valid for unshielded

network and printer cables.)

Trademark Acknowledgements

IBM, AIX, OS/2, OS/2 Warp, Novell, NetWare, Netscape, Apple, Macintosh, LAN Server, LAN Manager, DOS, Microsoft,

Windows, Windows for Workgroups, Windows NT and Windows 95 are registered trademarks of the respective holders.

Axis CD-ROM Server User’s Manual Revision 2.0

Part No: 14081 Dated: May 1996

1 2 3 4 5 6 7 ... 68 69

No comments

Axis 950 User Manual Page 2